Civil Engineering Testing & Technical Services
ATLES provides comprehensive material testing, geotechnical soil exploration, structural health assessment, geospatial surveying, and technical consultancy services for civil infrastructure and building projects.
ATLES Service Scope
Overview of our five primary capability areas spanning field investigation, laboratory analysis, surveying, and engineering advisory.
Consultancy Services
Expert engineering consultancy, Detailed Project Report (DPR) preparation, structural audit reviews, concrete job mix optimization, and quality assurance auditing.
Survey Works
High-precision topographic mapping, DGPS control network positioning, Robotic Total Station layout setting out, RTK UAV drone photogrammetry, and geological bore water location identification.
Material Testing Services
Standardized physical, mechanical, and chemical laboratory testing for aggregates, sand, steel reinforcement, cement, job mix formulas, and construction water.
On Site Testings
Comprehensive field testing services including subgrade compaction density, Benkelman beam deflection, static pile load tests, soil boring, and non-destructive concrete evaluation.
Structural Rehabilitation
Structural health evaluation, crack mapping, carbonation testing, rebar corrosion scanning, load capacity re-assessment, and engineered repair & retrofitting scheme formulation.
Field & Engineering Services
Comprehensive on-site testing, geotechnical drilling, structural condition diagnostics, pavement evaluation, and geospatial surveying.
Highway & Pavement Testing
ATLES offers specialized pavement engineering services to assess flexible and rigid highway structures. Our field testing protocols ensure that road subgrades, base courses, and asphalt layers comply with design specifications and load-bearing requirements.
- Field Compaction & Density Verification Reports
- Rebound Deflection & Structural Overlay Design Recommendation
- Asphalt Layer Bitumen & Gradation Audit Reports
Structural Assessment & Rehabilitation
In-depth structural audit, crack assessment, load capacity re-evaluation, and engineered retrofitting and repair strategy formulation.
Environmental & Chemical Testing
Environmental baseline surveys, soil chemical aggressiveness analysis, and water chemical testing for construction and compliance.
Concrete Structural Evaluation
Concrete core testing, slab load testing, rebar corrosion mapping, and structural concrete quality assurance.
Pile Load Testing
Static axial compression load test, initial/routine pile testing, lateral load test, and Pile Integrity Testing (PIT).
Non-Destructive Testing (NDT)
Rebound hammer surface hardness, Ultrasonic Pulse Velocity (UPV), magnetic rebar locating, and core extraction diagnostics.
Soil Investigation & Geotechnical Drilling
Subsurface soil exploration, borehole drilling, Standard Penetration Test (SPT), soil sampling, and safe bearing capacity calculation.
Surveying & Geospatial Works
Topographic survey, Total Station land mapping, DGPS layout, UAV drone survey, and bore water point location identification.
Laboratory Testing Services
Standardized physical, mechanical, and chemical laboratory testing for aggregates, steel reinforcement, cement, job mix formulas, CBR subgrade, and water.
Coarse Aggregate Testing
Gradation analysis, Aggregate Crushing Value (ACV), Impact Value (AIV), Los Angeles Abrasion, and Flakiness/Elongation index.
Fine Aggregate (Sand) Testing
Sieve analysis, fineness modulus, silt & clay content, specific gravity, water absorption, and bulking factor.
Reinforcement Steel (TMT) Testing
Tensile strength, 0.2% proof yield stress, elongation percentage, bend/re-bend test, and mass per meter evaluation.
Cement Testing
Standard consistency, initial & final setting time, fineness (Blaine/sieve), soundness (Le Chatelier/Autoclave), and compressive strength.
Job Mix Formula (JMF)
Marshall Stability bituminous mix design, concrete trial mix proportioning, optimum moisture & binder content evaluation.
Field & Lab CBR Testing
California Bearing Ratio (CBR) testing under soaked and unsoaked conditions for road subgrade design.
Construction Water Testing
pH level, organic impurities, inorganic solids, sulfates, chlorides, and neutralizing alkalinity tests.
Need Technical Testing Support?
Discuss your civil engineering testing, field investigation, laboratory testing, or project requirements with ATLES technical experts.